Microengineering of Metals and Ceramics: Part II: Special Replication Techniques, Automation, and Properties, Vol. 2
Microstructures, electronics, nanotechnology - these vast fields of research are growing together as the size gap narrows and many different materials are combined. Current research, engineering sucesses and newly commercialized products hint at the immense innovative potentials and future applications that open up once mankind controls shape and function from the atomic level right up to the visible world without any gaps.\ Continuing from the previous volume, authors from three major...
Search in google:
The gateway to the micro and nano worlds: AMN provides cutting-edge reviews and detailed case studies by top authors from science and industry, covering technologies, devices and advanced systems. Together, these have an immense innovative application potential that opens up with control of shape and function from the atomic level right up to the visible world without any technological gaps. This and the preceeding volume cover all angles of micro-scale parts and components engineering from both metallic and ceramic materials, a very promising field which is a strong source of innovation and development for micro process technology, aerospace applications, sensors, actors, medical and dental as well as many other applications. In this volume, readers find casting and electroforming replication techniques, automation and quality control issues, and the characterization of the microengineered components. From the Contents:Micro CastingMicro Electroforming of MetalsFurther Ceramic Replication TechniquesAutomation PIMAssemblyQuality AssuranceMetallic MaterialsCeramic MaterialsTribological Characterization of Mold Inserts and Materials for Micro ComponentsDevelopment of a Simulation Tool for Wear in Microsystems Part I covers the introduction to this field and leads from the design and modeling aspects to tooling, molds, and micro injection molding as a powerful replication technology.
Preface. Foreword. List of Contributors. IV: Replication Techniques – Micro Casting, Micro Electro Forming and Further Techniques. 13. Microcasting (G. Baumeister, J. Haußelt, S. Rath, R. Ruprecht). 14. Microelectroforming of Metals (G. Schanz, K. Bade). 15. Further Ceramic Replication Techniques (H.-J. Ritzhaupt-Kleissl, H. von Both, M. Dauscher, R. Knitter). V: Automation and Quality Assurance. 16. Automation of the Powder Injection Molding Process (H. Weule, J. Fleischer, C. Buchholz). 17. Microassembly – Approaches to Meet the Requirements of Accuracy (J. Hesselbach, J. Wrege, A. Raatz, K. Heuer, S. Soetebier). 18. Quality Assurance and Dimensional Measurement Technology (J. Fleischer, I. Behrens). VI: Properties of Materials and Microcomponents. 19. Analysis of Microstructure, Surface Topography and Mechanical Properties of Microcast Specimens Made of the Dental Gold Alloy Stabilor G (B. Kasanická, M. Auhorn, V. Schulze, T. Beck, D. Löhe). 20. Microstructure, Surface Topography and Mechanical Properties of Molded ZrO2 Microspecimens (M. Auhorn, B. Kasanická, T. Beck, V. Schulze, D. Löhe). 21. Tribological Characterization of Mold Inserts and Materials for Microcomponents (J. Schneider, K.-H. Zum Gahr, J. Herz). 22. Development of a Simulation Tool for Wear in Microsystems (V. Hegadekatte, N. Huber, O. Kraft). Subject Index.
