IUTAM Symposium on Field Analyses for Determination of Material Parameters - Experimental and Numerical Aspects
The need for modelling of materials behaviour under various mechanical conditions is driven by the evolution of computer capacity and the ability of scientists to address complex mechanical problems. Reliable models for materials behaviour, including accurate numerical values of parameters, are necessary for a continued beneficial development of the computational side of solid mechanics. High rate plasticity, thermally assisted creep and phase transformations are only a few examples of areas...
Search in google:
Stahle (Malmö U., Sweden) and Sundin (Lulea U. of Technology, Sweden) present 20 papers from the July-August 2000 symposium motivated by the need for computational modeling of material behavior under mechanical conditions. Papers discuss experimental methods, optimization techniques, simulation methods, and some recently obtained results. Annotation ©2003 Book News, Inc., Portland, OR
Whole-Field Displacement Measurement with Moire Interferometry as a Basis for a Microstructural Fe Model of a Polymer Bonded Explosive1Measurement of Microscopic Residual Stress Based on the Evolution of Surface Roughness During Shallow Chemical Etching11The Incubation Time Theory and Experiment13Affordable TMF Testing Supported by FE Simulation17Identification of Dynamic Properties of Railway Track27Optical Method to Study Material Behaviour at High Strain Rates37Determination of Cylindrical Elastic Orthotropy in Wood by Digital Speckle Photography51Identification of Elastic/Visco-Plastic Material Constants Under Impact Loading63Parameter Identification for Inverse Problems in Metal Forming Simulations81One Step Prediction Error Approach to the Identification Problem of Creep and Viscoplastic Material Models101Automated Identification and Calculation of the Parameters of Non-Linear Material Models113Inversion Method Using Spectral Decomposition of Green's Functions123Determination of Ballast Parameters of Railway Track Using an Optimisation Technique139Estimation of Material Parameters at Elevated Temperatures by Inverse Modelling of a Gleeble Experiment151Hydride-Induced Embrittlement in Metals-Stress and Temperature Effects167A Non-Isothermal Model for the Phase Transformations and the Mechanical Behaviour of a 12% Chromium Steel179Size Effect on Stress-Intensity Factors of CNS Specimen with an Interface Crack Subjected to Mixed-Mode Loading189On Pennyshaped Equilibrium Cracks in Materials Reinforced by Fibers203Identification of Stress from Strain for Body with Not Fully Identified Constitutive Relations217Evaluation Method of Interface Strength Between Thin Films in LSI231List of Authors239
